I removed a thick carpet pad and also carpet so the cap that I was adding, was a wash, in my opinion. I totally wish I had stairs now (I live in a one floor condo....one day!) I thought I might have to touch the wood putty with the stair stain to make it much but it wasn't necessary. A while ago, we decided to redo stairs in the main part of the house: you know, rip up the carpet and have hardwood stairs! I know nothing about carpentry so do not wish to tear stairs apart to redo things, nor can I afford to spend a fortune to pay a pro to do it. You can see (above) where I started to work at the overspray on the steps with my little handheld sander: I used a 50 grit paper and it really was knocking it down – it was just going to take forever and a day. The stairs are beautiful! Love! I planned to make them into a nightstand or plant stand but when we moved, they were left behind. First , I removed all the carpet. I stained it on and used wood glue to attach it and it was impossible to tell that it was an add on. Janell. I did most of the staircase every other step with each coat – this way you can still get up and down the steps. Practical and Inexpensive Basement Stair Ideas: Redoing basement stairs isn’t difficult or time consuming! After removing the burgundy carpet that covered the stairs when they purchased the home (and undertaking a rather large renovation that included opening up the entryway), the treads and risers were chipped, pitted, and covered with cracked paint. I was surprised to find I could just use a razor to scrape it off – lightly of course. Source: website. Thank you for this great post. I am working with curved edge overhang MDF tread. I don't think I had that problem. High-quality prefinished stair treads are made of solid edge-glued wood—not a veneered or engineered material—and can be used to “cap” or reface an existing tread. Sarah you rock!!! You can purchase pre-cut stair risers for about $10 each or save some money and cut your own. Any thoughts or suggestions? GORG is right! There hadn't been a single scratch on them and I believe we tend to be a bit brutal on the wear and tear of our floors. It left a very small hole, that I filled with a dark tinted wood putty. If that is right I am so doing this!!! Pros: Carpeting is a popular way to refinish stairs. I wonder what minx stain is similar to the Dura Seal you used. I had enough tables to do four at a time. That is what I wish I had done. Enter my wonderful father-in-law and his assistant and their fab, much more powerful than my little mouse, sander. I went to Lowes to look at their stair treads, and found what you are talking about. I love the contrast of the stain with the white risers. Did you use any polyurethane on the stairs? I wanted to share with you how I painted a faux rug on our front steps. I know that took some serious time and patience, but WOW! I found several professional flooring companies that recommended putting one coat of Oil-Based Sealer, then two coats of Water-Based Finish on top. My Retro Tread Caps were $23 a piece. This may not be how the pros would do it, but it's done for about $150 in materials and a few days of my time. Kim and Scott had a staircase dilemma. The cap would be higher than the floor but you still need the same edge and color. How thick is the mdf board? I found this video, which was helpful. Hope that helps! Your builder was much better than mine because I took a peak under my carpet and the wood steps don't even go all the way over to the length of the riser to meet the molding! They are really long and I cut about 12 inches off each. Hope that help! Thank you so much for this post! keep in mind, I'll (wife) be doing most of the work, so please go easy on me! Do the wooden steps make a lot of noise when you use them? The kitty paw prints cracked me up! I was lucky the floors underneath were in perfect condition and only needed cleaning. Where did you find the tread caps for only $23? You could “finish” them…with the intent of replacing in the future with a real wood stair….but if you go to sell your house…the buyer will consider a plywood stair as subfloor material….and unfinished. Also, what exactly are the "threads" - the actual wood piece that goes over each step? I always use a can/bottle opener with the pointy side to get under those carpet staples and pop them up. Looks great !Jen Ramoswww.madebygirl.commadebygirl.blogspot.com, I love a great unfinished basement. .time to refinish the old wood stairs!! Thanks for reading my post! I ended up using one stair tread, two red oak boards that were 12 or 14 inches wide and a smaller one that was 2 or 3 inches wide. 47 Posts . @Chandlerdickson This was about 5 years ago and at the time, I bought my Retro treads on Clearance at Lowes for $23 a piece. Thirty buckaroos. There are some great grey stains out there and a lot of people custom mix one color with others, either lighter or darker, until they achieve that exact desired hue. Love this....I have the oak treads sitting in my garage for over a year just trying to get the nerve and time to do this to mine....:) I love how yours turned out. So I have decided to install Bruce Traffic zone laminate planks. And I stained them after they were installed, when I did the stairs. Beautiful stairs! I hear you can purchase wood treads at places like Lowe’s and Home Depot and install them over rough wood. The white wood that runs along the side was there already when the stairs were carpeted. I kept hearing mixed results from those that filled their holes with stainable putty. Refinishing Stairs Collection by Kris Hill. After watching them in action I’m very happy we hired that portion out. We were talking of moving and my oldest son said, "What! How to Refinish Stairs Step-by-step with NuStair. Thank you, thank you, thank you!!!!!!! These stairs are beautiful but the poly that I planned to add, I never did. If I didn’t answer one of your questions, leave it in the comments and I’ll answer you there! Or is it easier just to leave them and touch them up as needed throughout the months? @Elissa C Thank you! It might be less expensive than tearing out stairs...and since you will be getting older instead of younger...it might even be safer. gotta say i agree with all the other comments. I pulled my carpet up last year and painted my steps white. Great solution. Hey There! Since you are adding thickness to stair tread, did you use some form of trans it ion strip at top of stairs? I really think this involves many factors that are individual to your situation. Regarding laying a new landing what are your thoughts about laying each piece individually and they glueing and nailing it down versus glueing the whole landing together and then put it in place? She has small feet and is graceful and quick and no problems on stairs what so ever. Thanks so much!!! Step 3: Sand entire staircase. If you decrease the height of the risers, you have to add another step or two which means your bottom step will be further away from your current bottom step. the stair is placed in an opening in the floor where the joists are locally supported by two sistered joists which go parallel to the stairs and tie into the perpendicular joist which forms that obstruction. Also, it will make moving furniture - think mattresses - up or down the steps more difficult. I would cut them to size and dry fit before I installed them. Thank you, advice is much appreciated! What was your reasoning for using the MDF for the risers? Thank you for the excellent photos and explanations. Those are what decides how high the steps are. Thank for being an inspiration to us all! There are just setting in place. I'd seen... Transform steps with a texture that hides dirt and adds a bit of traction. but you have inspired me to rip my yucky carpet up from under our dining room table and refinish that floor. I didn't keep a running total on most of the items. We will also be building a stair skirt to cover gaps on both sides of stairs - entire staircase is closed so we'd need 4 long stair skirts (one of each side long string of stairs) and some smaller ones as our stairs turn. Retro-fitting stair treads is the simplest solution for a DIY’er intent on installing hardwood treads over an existing flight of stairs. I'm sort of obsessed with the contrast of wood and white right now...and wow. I wasn't... We needed some speakers for my son's computer. Have a highly utilized stair in your home that needs new flooring? The mdf looks great and so much easier than fixing what's underneath! Thanks for the inspiration! We need lots of work. I don't live at that house any longer so I am working from memory. I have just stumbled upon your blog and LOVE it! Is it possible to match steps with a grey stain?? I've been itching to do this for years. I was in the orange store in Houston this week and they have pine stair treads for around $10.00 a piece. Photo about: Replacing Carpet on Stairs with Wood DIY, Title: Replacing Carpet On Stairs With Laminate, Description: .. , Tags: Carpet To Wood Stairs Transition,Ideas For Stairs Instead Of Carpet,Replace Carpeted Stairs With Wood Cost,Replacing Carpet On Stairs With Laminate,Wood And Carpet Stairs Combination, Resolution: 1000px x 800px I am concerned a straight cut on the ends might not be square with my existing stairs....:( Also, the sides of my stairs had carpet on them so I need to fill in the staple holes and sand. I already had a power miter box saw, too. This, however, would leave scuff marks on … It came out to around $40. I would talk to a contractor to see what is involved before doing anything. Visit. Mine are 85 lbs, 90 lbs and 120 lbs Golden Retriever. I don't remember how thick my mdf was but it was the white primed kind so I don't think there are many different options when it comes to that type. When I bought these many years ago, my particular Lowe's was clearing them out at a discounted price and that is why they were so cheap. So…I just left the holes as is! As for scratching, they didn't scratch at all... in my opinion you can't beat red oak for durability. Thanks for reading! Hope your experience is a good one. I did almost the same thing before I saw your site. It turned out great. We floundered a bit in figuring it ou… Since the carpet wrapped over my top step, I didn't need any transition strip. Everywhere I've looked , theatre's are $40 - $50 each. I was not so lucky to have the rounded edges or good quality of wood, just basic builders wood....but I made it work. We were thinking of sanding both the flat and riser of the stair and possibly staining the flat, and painting the riser. I know that it was a lotta hard work...and if it were me, it would have really tested my patience levels...but it paid off in the end, didn't it? LAST 3 steps turn 90 degrees and are made of 2nd grade plywood redoing the 2 plywood sections is out of the question cost of ordering yellow pine to high. I really had to look close to see them. Also, the stain finish was so pretty, I didn't want nail holes and putty to ruin how perfect they looked. About the stairs: would the stain look even halfway decent if it was applied to the plywood? Our current house has that horrible fiber board stuff so a DIY project wasn't even an option. Great job! I have 2 questions for you. I am redoing the 'basement' of my trilevel, including replacing old carpet with Allure vinyl plank. If I had bought oak hardwood stairs, they would have cost a bundle. If you have to repair the upstairs subfloor AND REBUILD (remove the OSB and then lay down NEW PLYWOOD on) the stairs you are in for a MASSIVE bill. how thick is the wood you put on your landing please? Glue, nails and risers, those treads shouldn't move. Also, the floor adhesive was pretty thick and I applied a generous amount so that also allowed for some forgiveness here. I hope that helped! It took about 30 minutes to rip up the plywood, 30 minutes to paint the stair risers including setup and clean up, about an hour to draw the lines and then another 30 minutes to nail the stairs and apply caulk. Hope that helps. I ended up picking white primed mdf because I was on a tight budget and it was really inexpensive for 13 stairs. Hope this helps! They turned out AMAZING. One of the houses we were in had a carpeted runner and that really helped the dogs but the Golden would occasionally fall even with that. Retro-fitting stair treads is the simplest solution for a DIY’er intent on installing hardwood treads over an existing flight of stairs. You did such a fantastic job. In order to reduce the height, you would need more stairs which might mean 2 or 3 more feet longer than the space you have. Creaky stairs can be infuriating, particularly late at night and early in the morning. These stairs led to a bonus room over our garage. I can not wait to do my steps!!! When all of the stairs are dry for a full day, apply a clear coat of poly. He will be thrilled to have this information. Difficulty Level: Moderate. At the time we lived here, since it was Florida, we didn't have a lot of shoe traffic. I'm hoping to do mine this spring! You have inspired me to begin some projects in my home now...I'm sure hubby is gonna looove me now! I tried to take a photo, but it looked horrible as they are the original wood stairs and need to be refinished, but do an online image search for wood stairs. It also kept the mess and smell on my patio. Your final project looks amazing. @Michelle I got this from DuraSeal's website It can be used with or without a finish coat, and is compatible with all DuraSeal® water-borne and oil-modified finish systems. To adhere the caps to the steps, I used heavy duty flooring adhesive in a giant caulk gun and a nail gun to secure them. I have a similar situation, but with a triangular landing. I think that is still a good deal. I used one to pull out carpeting in 3 bedrooms, hall and living room. but you have inspired me to rip my yucky carpet up from under our dining room table and refinish that floor. We had a broken step and tore the carpet up to replace it and there were the wood steps I had envisioned in our little farmhouse. In the process of remodeling, want to remove carpet on stairs, live in townhouse, 6 stairs up, 6 down therefore high traffic, concern is white back area of stairs, does it get scuffed from shoes, did y use protective sealant ? I am suspecting though that there is ugly wood under my carpet...... What product did you put on your stair so they werent slippery. I found that it seemed to be a good thing to have the riser sit on top as extra insurance. Did you have to cut the existing stair tread flush with the riser? Good luck and I hope that helps. I had to buy risers for the 13 stairs and 3 pieces of red oak boards to finish out the landing. These required very little effort. I scraped the stairs a little and vacuumed them. It's a board that is one piece from the top step to the bottom and is where the top of the stair goes. steps retrotreads stained mix. I like how the previous homeowners transitioned this area. Picture Of Refinishing An Hardwood Staircase Redoing Stairs That Are Plywood Norme Co How To Refinish Stairs That Were Carpeted Cuckoo4design ... love this guide will adhere we sanded off your steps i came back out seriously if you would do about stairs and a stair redo them. The little "vignette" on the wall is adorable too! We are buying a new house with the same vanilla carpet that's dingy near the baseboards. Are thinking we should cover it w new risers. Q imported from our old site, Face Lift Floors: We have a townhouse with plywood construction. Home Redo Stairs Wood Stairs Home Reno Hardwood Plywood Redo Stairs Stairways Pine Stair Treads How to redo stairs for less than $200 - Simply Enjoying Home Our website may contain affiliate marketing links, which means we may get paid commission on sales … Wood Floor Plywood Redo In 2020 Plywood Plank Flooring Diy. If I had more money to spend, I would have gone with some type of solid wood (probably a hard wood, then primed and painted it myself). Your blog is an answer to (more than one) prayer. YEP. So maybe a super shiny poly would have made a difference. I bought mine at Lowes but there are several versions out there now. It took them a couple hours of sanding, but it did a fantastic job. Thanks for sharing!!! I was worried that the boards might stain differently than the Retroread but it was a perfect match. My dilemma is do I need to buy new treads for the stairs. If you draw the step going up, then across, then up, etc, you can get an idea of how much space would be needed. http://twigdecor.blogspot.com. Just found this because we have laminate on our stairs and I’m irritated by the lip for the product we chose (Pergo XP Homestead Oak). The old carpet on my stairs was worn out and stained. Looks like this house will soon be ourshttp://www.zillow.com/homedetails/1009-Gary-St-Milton-WA-98354/81370053_zpid/#What would you do for window dressings for the two rooms by the front door? I had the stain. Source: website. Does your stain say that it recommends a top coat for protection? Lots of scraping and lots of painting. I kept the tread with the least oak grain for the top one in hopes of making a smooth transition. Very disappointing because I really wanted to do this same project. What plank flooring did you use and what did you do about the height difference? My first step might have been a little taller and the last step at the very top. Loving this look and the great step-by-step pics!! I bought them about 4 years ago, I think. I didn't cut them flush. Hope that helps. But since I was removing a thick carpet pad and thick carpet, I never felt like any steps were off or too tall or too short. I am not sure. For the face of the stairs we cut 1/4 inch smooth plywood (I think it was birch) and cut each piece to fit exactly. what lumber did you use to match the retro tread so well on for thickness and grain on the landing? I wanted to achieve a layered,... Can you believe that Thanksgiving is right around the corner? Brilliant How To Fix Stairs That Used To Have Carpet Aug 21st Stair makeover awesome prefer wood stair parts section of the natural wood stain for free 2day shipping on qualified interior handrails types of paint and diy how to match other stair with wood pumpkins. How to Replace Stair Carpet With Paint. But I think mine looked pretty good for the price that I paid. I took a chance doing that and never regretted it. I wish I could help but you might need an expert for this. Nov 7, 2013 - How to refinish your stairs. I bought tread at a local lumber yard that has been in business for about a hundred years for approximately $2.00 a foot. :). The stairs in new homes typically are not as steep as older homes and if there is a landing half way that seems to help my dogs. Thank you so much! We are restoring our foyer and refinishing our stairs soon and your before and after pictures are an inspiration. Saturday, August 26, 2017 at 6:29 pm. Thanks for reading my post! So let’s break it down, shall we? bought mdf stairs plywood treads brady. : You have to look to see them, and I was sure to soak each hole with stain so you couldn’t see bare wood at all. I looked for some step by step (pun intended) instructions on what to do for a loooong time and couldn't find anything. Was your white wall/stair trim already there when you. 36″ x 10-1/2″ Unfinished Oak Interior Stair Tread and 42″ x 10-1/2″ Unfinished Oak Interior Stair Tread are the two sizes the kits come in so we ordered seven of the 36 inch and six of the 42 inch after measuring both sets of stairs and determining the crazy size differences. Retro Treads can be found on the internet. All of them teenagers. I made sure they wouldn't have any super rough spots but I didn't spend hours sanding them ultra smooth. Be kind to yourself and have the lumber yard cut it for you….. Did you also use the nosing, or just the tread? Thank goodness. I didn't seal it and if a scuff appeared a Magic Eraser took care of it. When I first loaded all those treads on my cart at Lowes, I chickened out and put them back. If you decide to do this, there are a few things to think about. (I found a product that you can add over it to make it slip-proof, so I’ll let you know how that goes.). Looks like a professional did those stairs!!! I hope this helps those of you who are thinking about trying it out! Maybe it was because my stain said it really didn’t require a poly. We had the treads custom-made because more than half of them are pie-shaped. I think we ended up boarding our animals for 24 hours and doing the poly while they were gone. I didn’t sand the other planks at all and they turned out great! I want to do this for our stairs, but am kinda of afraid of the cost. Tight on cash? Two sheets 4×8 smooth hardwood plywood (1/4”) – $40 ( ROUNDED ON PINE, SQUARED ON PLY). *** Carpeted Stairs. They look awesome and you were very brave! So glad to see the fabulous results and it gives me back up to share with the hubs! gotta say i agree with all the other comments. After you made the mudroom and redid the stairs! Thanks for sharing! They are in terrible shape, but I'm already in love with them, as hideous as they are. We were lucky that the glue that I couldn't get up, wasn't that thick. Totally off the subject. It was a tremendous pain and it didn't always line up perfectly.) ), I did the whole project myself, start to finish. Refinishing an Hardwood Staircase: This is an adventure in refinishing my hardwood staircase, told by an amateur artist and homeowner. But, the stairs still looked so bad. If installed properly, it will give your stairs a brand-new look, and your stairs will be more functional, more comfortable, and quieter than before. I hope that helps. Thank you again! (my miter box was old and only cut like 6 inches across. And I think it looks gorgeous but I’m curious about the poly. Source: website. It didn’t work for that, but it was perfect for our stairs! How to Redo Carpet-Covered Stairs. I’m SO glad I didn’t fill these. If you’re interested in a cost-friendly yet reliable option, plywood treads are definitely the way to go. So I pulled everyone one off added more adhesive and this time I nailed them with several finishing nails on the sides and back. Did you put the Retrotread down on top of the plywood sub floor and then glue down oak boards behind the Retrotread? Thanks Stacy. I am butting the top tread to my wood flooring and need a good match. http://www.homedepot.com/p/Stairtek-1-in-x-11... https://www.lowes.com/pd/RetroTread-11-5-in-x-42-in-Raw-Red-Oak-Stair-Tread/1000445871?cm_mmc=SCE_PLA-_-Millwork-_-StairParts-_-1000445871:RetroTread&CAWELAID=&kpid=1000445871&CAGPSPN=pla&store_code=2870&k_clickID=716aad89-9881-cb68-aa12-00000ca06176&gclid=EAIaIQobChMIi4C13oys2wIVDMRkCh0UXQHsEAQYASABEgKL0fD_BwE, https://www.lumberliquidators.com/ll/c/Lake-Toba-Acacia-Laminate-Retro-Fit-Tread-A10TTRFT48/10041260?Wt.cs_id=CSE_shopzilla&CA_6C15C=420003430000660028, Why Everyone is Freaking Out Over These Country Cottage Rooms, 30 Stunning Ways To Use Metallic Paint (No Experience Necessary! Do you think the owner would mind? I have been told that they have gone up in price since I bought them. 2. See more ideas about stairs, stair makeover, staircase makeover. The retro tread has a portion of molding that hangs down and disguises this area so you don't need to make additional cuts to the existing treads. Mine were unstained and I stained them a very dark color. You wouldn't need to cut off the overhang. I was worried that the boards might stain differently than the Retrotread but it was a perfect match. Nice job!! This part was the hardest for me though – sawdust was EVERYWHERE. Thanks. If I ever do laminate, I am going with new one that said it was water proof, I think! Maybe fine when we were in our 20's but not now! your stairs are gorge! I am researching redoing my stairs also. I have wanted to get rid of the carpet on my steps forever and now I can. I just stumbled across your blog.... MAN have I been missing OUT. How much was your total cost on putting wood on the stairs. Yet a large proportion of squeaks are caused by friction: wood rubbing against metal. I don't know what the subfloor looks like, but if it's as nice as yours, this is a real option. I see the Retro treads now are $10 more than what I paid five years ago but still a good buy in my book. It looks so fabulous! You did a fantastic job. I love accent walls. alas, we live in a rambler. They look absolutely AMAZING. I think the spindles would have to be removed and then reinstalled into the Retro Tread and that would be challenging. I think it is great that you just took the initiative and did the project yourself. I have one step that looks like a piece of pie as it is in a curve section. Are you kidding?" Another factor for us, was the fact that only one bedroom was up these stairs. Rebuilding stairs is worth the same price of the vinyl AND the cost of labour to repair the upstairs subfloor. Tired of spending a lot of money on charger plates? I have a classic 80's home setup. I appreciate the time and effort it took to re-do those stairs! Were your stairs pretty square? I compared options of all the boards that equalled the width that I needed. High-quality prefinished stair treads are made of solid edge-glued wood—not a veneered or engineered material—and can be used to “cap” or reface an existing tread. You can also buy 2 colors and "swirl" them to get a near perfect match if your floors have more than one shade of color. I would cut half way and then flip and cut half way from the other side. I thought others could use this idea as inspiration. I am going to attach a decorative tile on the riser!!! But, it is TOTALLY worth every minute of pain. Just something to keep in mind if you are a perfectionist and want the runner to look perfect. Supplies: wood filler. I have a similar photo on my blog from where my fat cat walked in the paint. So it was about 3 inches of step overhang. 😂 I do remember thinking that I couldn’t even tell that they added the poly by looking at the stairs. I would guess around a three foot square. lol Please stop by my blog sometime, I have only been blogging about a month now, but have met some amazing ladies and I'm having a ball! Your landing looks good. :o)www.5reasons2save.com. Congratulations. This will decrease your headroom as you walk down the steps. It goes on milky, but dries clear. They turned out beautiful. I don't have the receipts but I would guess the entire project came to slightly less than $500. after redoing my steps I bought some step runners and it helps so much with noise. Discover ideas about Stairs In … plus check out our favorite featured staircases and then 25 Great Staircases and Entries.And now that you’ve got stair envy… Here’s Stacy to share her carpet-to-wood stair remodel (you might remember her $20 board and batten kitchen island — Stacy knows how to stretch a dollar!). We cut our own out of thin plywood and that only cost about $20. I got it from Lowe's -- it's just cheap planked pine boards that you get about six to a pack. Your tutorial made me want to start on my stairs. Just removed the carpet in my 400 sq ft den and layed down laminate. To me, the most important little tool is the tack cloth because even after vacuuming and cleaning the stairs I still got a huge amount of lint on the cloth. Wow! I found red oak plus the stain to be very durable and easy to take care of. This is the preparatory step to applying wood stain on the plywood. Have you gotten any nicks or chunks of wood get knocked off? How did you remove the over hang on your stairs? It didn't take long for a few to work their way loose as someone was running up them. I've never seen Dura Seal....I am going to look for it. I’ve read a lot and several recommend to put those over the existing stairs. Even if it's not a tight fit, it's better than nothing. !You are one brave woman and the bravery paid off! This is what my stairs will look like once we remove the carpet. $60 Carpet to Hardwood Stair Remodel I already had a power miter box saw, too. Gorgeous! I always worry that the stuff you buy at the hardware store doesn't wear as well as what the pros use. I ended up taking them all off, adding adhesive and then used a power finish nailer and then they stayed put. I didn't want to have to trim all the treads to accommodate the covers. Big difference from the price you quoted of $23 :/. I just read your post today (3/7/12) about how well your projects have held up and it lead me here. Wow, a curve...that might be beyond my skill level! We are currently in the process of doing this to our stairs that open into our kitchen (the main room of our house). I have plywood under carpeting. I have a railing with spindles and a post on my stairs going half way up ( and then it's wall-to-wall after that) How would I work around that part ?? We have an unfinished 1/2 wall from the landing to the second floor. Also, getting contractor to make steps deeper which should help. HOwever, what red oak boards did you use? I purchased two packages of the plank flooring for $10 each and didn’t even use all of it. A plywood stair is not worth finishing in my opinion. I put them all together with wood glue and clamped them securely. This was several years ago and I got the Retrotreads on Clearance... At that time they were much cheaper than they are today, but I would say that all in was less than $500. I want to start ripping up carpet right this minute!! You sound like you are good to go! Good luck to you on your stairs! Well, this is a cheater version (little scraping / little painting) that uses wood caps on top off your existing stairs. The finish nailer didn't leave big holes, just tiny ones that I filled in with dark colored wood putty. I measured the height of my existing risers and then I went to Lowes but you could go to any of the places that you buy wood. Clean Up After Sanding. For now, you don’t really notice it, so I’m not going to worry about it. A stair cap covers them completely, no worries about how awful they look. Wow. Stairs are a complex system comprised of many elements—treads, risers, balusters, railing, and more. When I laid the red oak boards avialble at Lowes, they were 1/16? I'm thinking of doing a project similar to yours but am wondering what kind of a finish didyou put on the stair treads to keep them protected and still not slippery.Ruth, This was so helpful! Then a month later, they had more or had moved them and I snatched them up and didn't look back. Paint the surface of the plywood stairs, both the tread and the riser, with a coat of all-in-one paint and primer. I do know that they sell corner molding pieces to attach to the side. This wreath is so easy to make and smells so delicious! Love it! And those glossy super shiny wood floors you see? I wanted to see what was under the carpeted stairs, so I took a peek! We floundered a bit in figuring it ou… Washington DC area. Mine was not top quality, I only paid $19.97 for it, and still have some leftover for various subway art. I have been wanting to do this forever! That was the hardest part of the project. Learn how to rip up that carpet on your stairs and reveal (or create) the beautiful hardwood that's been hiding underneath. I was lucky that my stairs must have been square because I didn't run into that issue. I would love it if you would put what it would cost the average jo like me who has basically nothing "on hand. If I changed that room to hardwood then I was going to need to problem solve that top step. by the way, our stairway going down into the cellar is the same, as is the stairway going up into the 2nd story of our garage. They look fantastic! single. So my question is did you put poly on those dark steps? My overhang is still there but when I added the riser it became less noticeable and the caps have an front edge that comes down and pretty much hides the overhang. The cheapest I found were $50 each even at Lowe’s...Any tips? We're the stairs plywood? So glad I found this post! It was fully dry after about 2 hours, but this will vary depending on the brand you use. If so, what poly do you recommend? Also, by having them on tables, it was a comfortable height to stain. makes me wish we had stairs in our home to do a makeover. Sarah, you are the miracle worker. So, the stairs in the picture are stained with Dura Seal shown and you didn't have to put a polyurethane sealer? Thanks for any advice, Pam. We shall see! I figured they would look fantastic, I just wanted to make sure they would be safe. In addition, to these factors, my kids were older. Is it easily scratched or pretty resistant? It kept me from feeling overwhelmed by the staining. ;) I am always so impressed with the way you tackle projects. I used a satin water-based poly so that it won’t yellow over time. I came across your blog by accident and I am so glad I did. ... Where did you get your? When the carpet was up, I was left with this: Many of you have asked if I did anything to the steps – put any wood on them, etc. The 2 best solutions for basement stairs are: 1) carpet and 2) hardwood/wood…or even better a combo of these two – wood plus a carpet runner. Plywood Stairs Makeover. Hello! I used a power miter box saw. Osb Oriented Strand Board Sub Flooring I wanted to poly them before I installed but I was worried that when I shot the nails in, it would leave marks that would not be easy to touch up. I may try sanding it down more in the future and restaining. You might want to consider a chair lift on your stairs. I have hardwood stairs in my current house (slippery unless you have barefeet), and I paid $9000 to have the carpet pulled up and oak put down. Well to be perfectly honest, remove the carpet from our entire house. What type of nails did you use & are they visible? They weren't well known and people weren't using them... then I posted this tutorial saying they were the best thing since sliced bread... and the price went back up to full price but it is still pretty reasonable. I thought others could use this idea as inspiration. @Gracie Gomez Yes, it is one tread per stair. Your stairs are gorgeous. I absolutely LOVE it! When I came a few days later, they were gone. Yes, that is correct. Apply paint around the four edges of each tread and riser then paint the center. After using a putty that matched the stain, you could barely see where they had been. refinished stairs diy style design gab. *sigh*. The BackgroundFooted trays are all over Instagram and Pinterest right now. ;) It turned out fabulous! To stain, I used painters tape and taped off the treads and went over and over them a few times to make sure there was a good seal: You can see why I wouldn’t recommend priming or painting first – the stain got on some of the risers as I worked. Is the finish still glossy? In case anybody is reading all these comments: (;->) When I have to hand sand inside I hook my shop vac up to the sander and it sucks almost all of the sawdust up. Now they are not looking so fresh and farmhousey any more. I was super happy with my red oak. It runs in … Now if you can use what is under your carpet to paint or stain, that is the most affordable way to go. Was it already stained or did you use the stain from your steps to finish ot. ). You can use woodprix, it has the best handbooks and ready instructions. If you have to duck to avoid hitting your head now, it will be even worse afterward. I am not sure that Retro Treads would work for stairs with spindles. Plan accordingly. budget staircase redo staircases. TIA. 7. Be sure to check out the FAQs tab at the top of the site and my Projects page for paint colors and DIY projects as well.THANKS so much for reading! A tread is the top part of the step, where your foot lands going up and down the steps. But the landing doesn't look salvageable. At the edge of each step, I tore off little pieces of the tape to go around each tread: I did two coats on each of the stairs. We did all the stairs demo ourselves but we hired a stair company to add all the treads and risers for us. I remember buying a lot of sanding sponges, not sure how many I bought. :) I did two coats of primer, one coat of glossy white on each riser. In all fairness though, these stairs didn't get a lot of foot traffic. I don’t know what they used or how it worked out because it sold right away and the new owners truly could not get us out quick enough! It's a board that is one piece from the top step to the bottom and is where the top of the stair goes. 01/11/2015 at 11:53 am. I am so glad to have found this DIY project. For many years, I didn't polyurethane. :)Blessings to you!http://mycottagecharm.blogspot.com. To avoid multiple flooring and awkward transitions (and to get rid of the nasty old carpet! Need to replace carpet but not too happy of having dirtcy carpet again. Thinking I might add this to our summer project list. If you do add the Polycrylic, you may want to consider a stair runner because this could make the stairs a little slick. Thanks for the how-to! If so, did you do it before installing? After you placed the caps, do the risers sit on top of the caps or just behind it with the cap pushed up against it? We recently moved into this home that mostly has gray walls but I am a color... Love to propagate plants? Forecasted minimal foot traffic meant only one thing. Could you post some pictures? What internet did you buy them from? Dec 12, 2019 - Explore Rae Simpson's board "Redoing stairs" on Pinterest. Where did you purchase your plank flooring? First, I put on all the risers, DO NOT DO THIS. plus check out our favorite featured staircases and then 25 Great Staircases and Entries.And now that you’ve got stair envy… Here’s Stacy to share her carpet-to-wood stair remodel (you might remember her $20 board and batten kitchen island — Stacy knows how to stretch a dollar!). I never have enough coasters. Whatever you use, just let it dry completely before applying your stick ons. @Tameka Smith I hope this picture helps. I only ask that you credit my site with a link if you reference one of my projects or use a photo. There is one on each side of the step. Because I had help, I was at the mercy of their schedules a bit. Any ideas? (I read every single one. That helps a lot! It's the perfect easy wreath for Christmas.... We recently created a faux fireplace mantel surround for our bedroom. It looks like the white wood wall/stair trim was done first and then the treads and risers. I have been very excited to find this tutorial. http://www.homedepot.com/p/Stairtek-1-in-x-11... [email protected] I love, love your stairs. My stairs are oak and I would love to have mahogany, but that might have to wait a bit, we're about to start a master bath re-do ...on the cheap! I Live in a split level and want to get rid of my carpet on the stairs. taller than the stair tred. Amazing! where or what site did you get your treads? If you just slap boards on top it will change the height of the steps at the top and bottom - which may violate code requirements for rise height. I just gotta get ride of that carpet, ya know!! The ones at HD are 1" thick. I would ask someone in the flooring dept of a hardware store and they can probably steer you in the right direction. Thank you, Duraseal quick coat 2 hour antique brown stain, 31 Amazing Furniture Flips You Have to See to Believe, 3 Simple Green Ways To Clean In Your Home. the joists are perpendicular to the stair. Painted pickets & stairs: how to make that cheap plywood under your carpet look perfect and polished and finished. I saw it advertised on Pinterest. Our interior stairway has steps that are much too high for us. I have a set of carpeted plywood stairs in my house and have googled a bit on this. I’m trying to find tread caps but they are double what you said you got them for. Those are what decides how high the steps are. Seriously! If each thread cap is $23, that seems so expensive (is that one cap per stair?)! Doing this, did it change the height of your steps because you are adding to the top of the step? The tread(s) can start to rub against the top of the riser causing a squeaking or creaking noise. It felt like it took months for this to get completed, but it was really only a few weeks! any suggestions ? Did you have to plane them down? It's noisy with both machines running, so wear ear plugs. :DMakes me wish I could rip the carpet off the stairs in this house! The gun was $20 and I bought several cans/tubes of flooring adhesive but only used 2. My bottom step was going to be high and my too step was shorter. I combined two ideas to makeover my basement stairs. 10" high and very steep. I ended up not putting a top coat on since these stairs didn't see much traffic and we had enough animals and I was sure they would track through it while the several coats were drying. So glad you left a question! Did you have that issue? I'll be linking your amazing stairs. Thanks for the great guide! But it didn't take long and some treads loosened and came off. Interior stairs can be covered by several types of material, such as carpet, wood, tile or natural stone and sheet vinyl. TIA, https://m.lowes.com/pd/RetroTread-11-5-in-x-42-in-Unfinished-Red-Oak-Stair-Tread/1000445871, Thanks for the great guide! It worked like charm! If that makes sense... Can you provide the source for the risers? Thanks for any help you can offer. Now seeing what you've done, I'm much more determined to give it a try myself! On the landing, I sanded down one of the planks with my little mouse sander a bit, and wish I hadn’t: Sometimes my sander does this and it drives me mad. This was a cost effective way to get stairs. I think this may be our solution :). Check out my step-by-step tutorial so that you can redo your own stairs with minimal work and maximum effect! $30? Good luck from an 80 yr old ! http://sewbeeit.wordpress.com/2010/01/26/red-hot/I also blog about the painting herehttp://sewbeeit.wordpress.com/2010/01/25/paint-it-red-soon/and here http://sewbeeit.wordpress.com/2010/01/15/stairway-to/My stairs were stained but they got messed up when we renovated and I was looking for a change. Somehow I missed your question. Hardwood is too expensive. Do you have a more inexpensive supplier. would this work if my stairs are made of plywood? This was a perfect solution for my house and I’m thrilled with them. )If you have a specific question I will do my best to answer you back here! Actually, the floor adhesive that I used might have been thicker than the glue for the carpet. But alas, we just had some nasty, not-suitable-as-flooring wood nailed under the carpet. I know it took me forever to get this post up, but I’m finally going to share the rest of the steps it took to get the stairs to where they are now – that would be GORG. With the sanding, take out all traces of the existing finish. Beautiful!Brooke. You shouldn't have to replace them if they are clean and smooth! You'll have to let everyone know if you find a solution! Gorgeous even after many months of use. Besides to build a standard set of hardwood stairs probably costs four times more that taking your existing stairs and changing carpet stairs to hardwood steps, in a wood species to compliment the balance of your home decorating. Stained the lip, and applied a peel and stick look like wood flooring and painted the risers white. I would clean the risers first. I think that socks on stairs can be dangerous, either wood or carpet. Mr. In the pictures where it shows some stained and unstained, none are installed at that point. It's a classic New Orleans shotgun. Thank you very much. But, I'm not an expert on why they didn't scratch. My total cost for the project was less than $30. So very cool! It works much better to put on the cap and then the riser sits on the back of the step and helps hold it in place. I did this probably around 5 years ago (maybe more)... and when I found that at Lowes, they were on clearance. I know you're luurrvving it! The results were so identical that I couldn't tell a difference. $60 Carpet to Hardwood Stair Remodel Discussion Starter • #1 • Oct 28, 2009. beautiful job, by the way! Your post is exactly what I need except for one thing. And it was quite the project. I LOVE it! So far I have the steps stained, now I am going to paint the risers and balusters. Did you have to trim off a piece of the tread for the retro tread to fit? thanks!Laurie. I believe my white paint was high gloss for wood trim and that made a big difference in cleaning the white risers. Wow what a great result! Crossing fingers that it’s not plywood there! The burned out... Quarantine 2020 has turned into Home Renovation Quarantine for us. I do have a landing and I used one Retro Tread and added enough red oak boards behind it to cover the landing. In my opinion , the carpet and thick pad that were removed seemed equal to the veneer step that was put on. Amazing job!!!!! At the top step, I just left the carpet around the top step – not sure if I will keep it like that or not. Note: we worked for three weeks straight, every day. Just food for thought…. One thing about the runner was that no matter how much we seemed to be good about trimming their nails the runner was plagued with pulls and loops from their nails. In my current house, the wood stairs lead to a carpeted hallway. Kim and Scott had a staircase dilemma. One time I stained a two wood crates using the Duraseal on one and Minwax on the other. I believe Home Depot even has their own version. Correct? Thanks for the info and inspiration! your stairs are gorge! Your staircase might be the last place in your home you'd think to decorate. There is one on each side of the step. I did have to buy an extra large caulking gun to apply the heavy duty floor adhesive. Beautiful results! I LOVE your blog! What about splinters? So the carpeting from the bonus room came through the doorway and covered the overhang of the top step. We are moving in a couple of months and will be house hunting in a couple of weeks, very exciting since we have been living in apartments the last 5 years. But I don't know what to do about the two pesky plywood landings. Your stairs look great. Do you think that the adhesive you used would be strong enough to hold the Treads without nails? I bought them at Lowes in Orlando, FL but I see Home Depot has a version as well now. Like, I would cry, harder. I want you to know that this rocks!!!! You sound like you have problem solved your way through all the visible issues and that means should you ready for anything unseen. Stain is easier to cover with primer and paint than paint is to cover with stain. :). We are getting ready to refinish our steps too. After removing the burgundy carpet that covered the stairs when they purchased the home (and undertaking a rather large renovation that included opening up the entryway), the treads and risers were chipped, pitted, and covered with cracked paint. 30 bucks for all that beauty... WOW!Now I wish we did not have a ranch LOLHave a wonderful weekPatricia. I could 't see on your post. Source: website. Sorry, but I don't know anything about these terms. Did you buy them in the store and is that why yours were less expensive? I used finishing nails in a nail gun. Kudos to you!:). What kind of saw did you use? You can learn much from them and make it yourself. My dogs have also experienced several different types of hardwood stairs. I absolutely love the way your stairs turned out!! I had recently seen a photo on Instagram of a home with beautiful mosaic stars stair wraps and was... We have the world's ugliest stairwell that USED to have a ceiling mount fixture. Thank you. My 85 lb dog is a mix, she has some (we think) Australian Shepard and Great Pyrenee in her. Super beautiful!!! So, I can totally relate to how you feel right now. I have floating stairs and want to get rid of the carpet - would this work on them? I was so excited to see that you did this because I was actually just trying to convince my husband of the same exact project! 18 Easy DIY Projects That You Can Do This Weekend! We didn't build our house, but the previous owner did leave pictures of it being built..I might have to see if my stairs had round edges! I don't remember for sure, but I think it was Minwax dark walnut. If you can look under the stairs, you will see what is called a "riser". Many years ago, I created a post where I took the carpet off my stairs and updated them with Retro... if you are a wood dining table lover, this project is definitely the one you are looking for. The steps were just as you see them here when I pulled up the carpet. I love your blog-it's one of my very favorites! What size was the landing ? If you can look under the stairs, you will see what is called a "riser". Here’s a visual from the top of our upper stairs looking down towards the foyer landing, and down to the newly painted stairs, so you can see how it … They came over a few weeks in advance and measured each step. The Duraseal stain was about $40 including the shipping and I remember the shipping on it was high but I wanted that color and brand :). Just curious, do you have a 1/2 wall to the upper level? You can purchase pre-cut stair risers for about $10 each or save some money and cut your own. You did stain all BEFORE you installed them? I put three coats of stain on each tread two hours apart for curing. Could you have just painted them instead? I bought two packages of foam brushes to apply the stain, and those were about $5. Looks fabulous! I had bought mine at Lowes and I know Home Depot sells something similar. One of the things we are doing is the stairwell and I want to do Scrap 'Boxes' along the longest wall. It turned out so beautiful, congrats!~ Sarah @ http://www.queenofdiy.com. They are called Retro Treads and mine were unstained red oak from Lowes. Plywood isn’t a finishing wood, I wouldn’t mind it down to an unfinished basement or in a workshop setting but not from the first floor to second floor of my house. Yes, I did have to trim each retro tread to fit and every one was slightly different. Millworkcity.com has a large section... Hope that helps. @Helene Katz The riser was pressed plywood, I believe and the tread was a super thick board that you can see in some of the pictures. We were lucky to have the rounded edges. Did you just prime and paint your rises? [email protected] Your stair project looks great. They were nailed and glued but the force of people running up the stairs made me think it was a good idea to have the risers additionally hold them in place. My stairs look a lot like this and may give this a whirl. Intro by Robin Steps by Ed. If I had done the whole thing myself, it would have been a week or two, but that’s only because I’m completely nuts impatient. Once the two coats were dry, I continued on the other risers with the primer and paint. How much did it cost you for whole project? The facings were painted white before installation, … How do your dogs do on the steps? Thanks for the reply. So many questions!! I wasn't happy with most of the affordable ones I... Hey it's Jess from Jessica Welling Interiors! I'VE MADE SEVERAL DRIED FRUIT GARLANDS FOR CHRISTMAS, BUT THIS ONE MAY BE MY FAVORITE BECAUSE IT'S... Don't throw out your hanging light fixture the next time you are doing renovations. You said in the article… “These stairs are beautiful but the poly that I planned to add, I never did.” But later in the question-and-answer portion you say that you did use poly. Here’s the cost breakdown on what I spent for all the stairs: Seven 12’ pine stair treads – $160. However, the problem isn't always easy to solve. 3/4 inches high . The plywood cabinet must be polished using a 100-grit sanding sponge. Yes, this is a pain, but, it’s really important for smoothing out imperfections in the wood. The holes give it character, at least that’s what I say! Picture Of Refinishing An Hardwood Staircase Redoing Stairs That Are Plywood Norme Co How To Refinish Stairs That Were Carpeted Cuckoo4design Refinishing Hardwood Stairs Before After Stair Remodel Ideas ... Redo wooden stairs, own stairs rails spiral stair treads over an exciting project. Then, I installed it as one large piece. The main causes of squeaking stairs are the shrinkage of the timber treads over time, and general wear and tear. Their 120 year old Chicago home's stairs had seen better days. There is a front nosing on each stair tread. So, it's certainly possible to do the work yourself, just make sure you don't need the stairs for awhile :0. It is hard to explain, you might need to go to the store and see one and they might be able to explain if it would work with your over hang or not. What type of poly finish did you use on top of the stain? I don’t mind it, but I may pull it up to see what the edge of the flooring looks like there. The stair redo how-to I know it took me forever to get this post up, but I’m finally going to share the rest of the steps it took to get the stairs to where they are now – that would be GORG . I also know for certain my steps don't have this potential under the carpet, your builder did you a solid! I have Large and In Charge (15 lbs and 120lbs). We used it after we laid our wood floors and it works great. I think the piece of board there didn't reach the sides completely (since it was covered with carpet... it didn't matter) and wasn't even a paintable grade of wood, if I remember correctly. See more ideas about stairs, stair makeover, staircase makeover. At the top of the stairs I cut a straight line in the carpet with a utility knife about an inch and half past the top stair nose. There was no skirting on the stairs, so we had to work with each stair individually to fit it tight to the wall. I only used part of this can. ;), This process took a while, but the planning before that took a good year – I took my time deciding what to do. The floor adhesive glue created almost a layer of "frosting" that I put the Retrotread on and that covered my residue carpet glue. I am replacing my existing stairs from the entry to second level in a split-level home. I think it was 13, including one for the landing. Walnut Laminate Flooring Walnut Floors Living Room Decor Furniture New Furniture Painting Plywood Cheap Home Decor Diy Home Decor Cheap Plywood Rustic Wood Floors. Tearing the house apart to redo your stairs just doesn't make sense. If I mess it up, I'll put carpet down or pay a pro to redo it. Their 120 year old Chicago home's stairs had seen better days. Thank you! This year, I'm going full-Boho for my Christmas decor.... Hometalk may collect a small share of sales from the links on this page. This type of stain is a polyshade – which means the poly is mixed in already. I just stumbled upon this--great post! I had 13 stairs and a landing. Thank you-Michelle. SO GORGEOUS!! So, so beautiful. In my situation, I considered it a wash. Hope that helps. That is the Minwax stain that I use most of the time. They are so beautiful! It consists of a Retrotread and then I glued assorted sizes of red oak boards to the far side of it. I love the end result.They do make an already tinted putty to fill in those holes. Did you use polyurethane after this particular stain? 1. All of the stairtreads came with the decorative front nosing. What did you do at the top of the steps? one. Transition from stairs to flooring in upstairs hall or bedroom floor? I have never had laminate stairs so I can't really compare the two. Lowes.com has them for $32, which really isn't too bad. Use duck tape or something to get it to work, or buy a different sander or shop vac. My steps were similar to yours but in a bit worse shape. The point we’re at here is the install. New Stair Treads in No Time—Here’s How to Do It … By Matt Weber. When you reached the top of your stairs, how did you transition from the wood and back to carpet? Before attaching stair treads it’s best to stain and finish them – this post discusses all of that too. Cons: Unfortunately, the carpet also tends to collect moisture and can suffer from mold issues if … Thank you, Stacy for response which is a big help, love clean look. I was also surprised at how well they stayed together with wood glue and clamping. This looks fantastic! The stairs up to the main level are also carpeted and the main level is a parquet.

Industrial Safety Engineering Course, Lion Outline Face, Fruit Of The Earth Aloe Vera Review, Highest Paid Neurosurgeon In The Us, Cumin In Mauritius, What Does The Name Cornelia Mean In English,